Looking for an answer to the question “How to connect to Wi-Fi without password?”, read on to find more.

Nowadays, a password for anything is a basic requirement to access any technical network. Even free Wi-Fi in public places is starting to be controlled. Organizations keep their wifi network secured by including credentials inside the boundaries of the infrastructure. 

For added convenience, manufacturers have created a variety of methods that allow a visitor to enter the network without having a password. But, this process is complicated and in some ways illegal too. In this post, we’ll go over connecting to Wi-Fi without a password.

But remember, it’s rude and even illegal to use another person’s Wi-Fi network without their permission. Make sure you have the owner of the network’s consent before utilizing any of the methods outlined below. Public locations have signs and posters displaying consent.

About Wi-Fi Security Protocol Systems

With that out of the way, let’s talk about the two wireless protocols that are used for Wi-Fi networks that don’t require a password. However, one out of these is permanently removed.

The no longer supported Wi-Fi Protected Setup (WPS) can only be used with older gadgets. Device Provisioning Protocol (DPP), commonly known as Wi-Fi Easy ConnectTM, took the place of WPS and was introduced by the Wi-Fi Alliance in 2018.

But don’t be concerned. When preferred, you can still use the SSID and password to connect your new devices. It is only that WPS connections are no longer supported.

Although DPP/Wi-Fi Easy ConnectTM has taken the place of WPS, you may still have WPS-capable devices, hence this article has kept the content for reference. However, DPP improves security and modifies how passwords are used.

Activate WPS on Android & Desktop

To begin, approach the router and find the physical WPS button, which is typically situated on the front or one of its side bodies. Typically, the button stated above is denoted by a shorthand for the technology’s name (WPS in this case), or by an icon that looks like two opposing circular arrows.

After locating the WPS key, press it while holding the device you want to use to access the internet, then go to the Wi-Fi network settings and choose the name of the network you want to connect to. Then adhere to the directions that are most appropriate for your operating system.

• Windows

Click the network icon next to the time, type the name of the desired WiFi network, and then click the Connect button. If everything went according to plan, you should only need to view the password entry screen for a brief period of time before the connection is made fully automatically and without the need for further actions.

• Android

Tap the gear icon in the app drawer or on the home screen to access the adjustments operating system. Touch the top right button after choosing the Wi-Fi item, and then tap the advanced option that comes in the menu that is shown on the screen. Select the vocal WPS command button and hold on till it connects to the network of interest.

How To Connect To Wi-fi Without Password

1. Connect to Wi-Fi with WPS

If the visitor has physical access to the home or office, using WPS is one of the most popular and simple ways to connect to wifi.

As you can see, this stops criminal people from using your wifi while they loiter about your property and steal it from the outside. Pushing the WPS button and connecting to your wifi network is only available to those who you have genuinely welcomed into your home or place of business.

To ensure that the phone or other devices may connect to your wifi network using the WPS functionality, a few parameters must be configured on the device. And to assist you, we have created step-by-step directions on how to configure a smartphone so that it may use the WPS capability.

Step 1. Open “Settings” in your mobile’s interface.

Step 2. Press on the “Networks and Internet settings” column that appears.

Step 3. Tap open the WiFi settings column and select “Advanced Option.”

Step 4. The option to “Connect via WPS button” is located here; select it.

Step 5. The WPS handshake protocol will start up. You’ll get a new dialogue window suggesting you have 30 seconds to press the router’s WPS button. The WPS handshake procedure will stop working after 30 seconds.

Step 6. Some wifi routers include a WPS pin instead of a separate WPS button. The “connect by WPS button” must be chosen in this situation, and you must then input the WPS pin, which may be found on a sticker on the router.

Step 7. You can connect the phone to the wifi network without a password if everything is done successfully. Additionally, until you instruct the gadget to forget the wifi network, it will stay connected.

2. Connect to WI-Fi with Guest Network

Making a guest connection on your router is another option for connecting to any WiFi with guests without having to worry about sharing each person’s password. The ability to connect to a guest Wi-Fi network is a function that many routers provide, but it has some disadvantages, including being insecure.

You can omit a password for guest Wi-Fi networks if you want. Every kind of gadget can connect to guest Wi-Fi networks. It would be beneficial if you were aware that establishing a guest network can make your primary network slower. This process will ensure that people who have legal access to your WiFi can log in.

Your Wi-Fi router’s guest network configuration is done by:

Step 1: Type the router’s IP address into the address bar to access the backend settings page. You’ll find the address printed on the other side of the router.

Step 2: Log in to the router with your admin credentials.

Step 3: Look for the Guest Network menu item. Depending on the maker of your router, it may be somewhere else. Try looking under the Wireless Settings if you can’t find it.

Step 4: Enable the guest network.

Step 5: Give the Guest Network a name and set a password for it, or omit it altogether.

Step 6: If available, enable the setting that enables you to limit the guest network’s bandwidth.

Step 7: To confirm the settings, click Save. You can point everyone who tries to join your Wi-Fi network to the guest network, which they can use without a password.

3. Connect to WI-Fi with Share Password QR

The QR code technique is one of the ways to connect to any WiFi network without a password. Someone must already be logged in to the network for you to do this, after which you must steal his or her phone and access the WiFi settings to discover the Wi-Fi password.

The QR code will be produced by the visitor’s phone. The QR-code scanner is always there in the settings of your WiFi connection. You just need to simply scan it to instantly connect to that hotspot without giving away a password. This process also involves scanning QR codes using your phone.

However, if you just scan that QR code with an external QR-code app and wish to know the password for that network, it will provide it to you in a matter of seconds.

4. Connect to Wi-Fi with the Device Hotspot

In addition to making a QR code or establishing a different network, you may make your own device a Wi-Fi hotspot that visitors can use to connect to. You can perform this with a laptop or a smartphone.

Given that it is the most portable gadget you have and is usually with you, you will probably accomplish this using your smartphone. All you have to do to enable the personal hotspot on an iOS or Android smartphone is browse the settings menu.

Through this, anyone will be able to get the Wi-Fi hotspot on their phone. One thing to keep in mind is that the hotspot Wi-Fi on your phone is probably rooted in your home Wi-Fi. Additionally, a hotspot connection is only active temporarily.

But in this case, your visitors won’t use your house Wi-Fi password to access the internet when you let them connect via a hotspot.

Share Wi-Fi from Android phones

Well, your work here is easy because all you get is an app and allow some basic network configuration, and go on. Nevertheless, let us discuss this technical issue and how you can have a quick fix. 

Android’s network adapter has limitations, which prevent it from having a default setting for turning on a Wi-Fi repeater. In other words, if you attempt to set up a hotspot when the Wi-Fi is ON, the Android system will immediately turn the Wi-Fi OFF since it does not support two connections at once.

Share Wi-Fi from iPhone & Mac Devices

This technique explains how to transfer your WiFi password from an iPad or iPhone to a MacBook. Sharing a wireless network password with a MacBook or iPad is possible if you have an iPhone linked to it.

You must touch on the SSID after opening the WiFi network on your iPhone to accomplish this. Now that the password-sharing option has appeared, all you need to do is use your MacBook to sign into the network with the shared password.

Share Wi-Fi Password on Phone

You have the full chance to quickly share the password for the WiFi network you are connected to or for all of your stored networks if you are using an Android device that is version 10 or later.

Step 1. Navigate to Settings and select WiFi & Network.

Step 2. The WiFi network you are currently connected to or your saved network’s icon should be clicked.

Step 3. Select “share password”

Step 4. To unlock the screen, you might need to input your device unlock pin or fingerprint.

Step 4. In a fresh background, you’ll see the QR code and WiFi password.

Now, you will have the ability to access the WiFi of the other device by scanning the QR code or entering the password.

Resetting the Wi-FI password on the Desktop (Windows)

Resetting passwords on Windows computers is nothing complicated. Follow these instructions and you’ve pretty much done it.

Step 1. Ensure that you keep your internet connection running as Microsoft requires some data connection to retrieve your password.

Step 2. Select the “I forgot my password” that appears on the Windows login screen.

Step 3. Enter your Microsoft account email address on the following screen.

Step 4. Microsoft will share a confirmation link to ensure your account is safe or a bot. Then you’ll receive a reset link through your mail or SMS depending on your choice.

Step 5. Put in the code when you open the Windows login box. A new password entry process will be presented to you.

Conclusion

Getting to someone’s Wi-Fi sounds intriguing but it’s illegal and indecent, to say the least. However, you’ll encounter so many moments where you might need to recover your own Wi-Fi network due to technical issues. Hence, this becomes a much-needed assist.

Hopefully, this article helps you comprehend the technicalities that go into setting up network security. 

FAQs

1. How to safely use Wi-Fi without knowing the password?

Open the settings app on your smartphone. Select network and internet now. A list of all the nearby wifi connections will appear on the next screen that appears. Additionally, there is a settings option labeled “add network” with a QR code icon just near it. Scan the code and connect without a password. 

2. What is a WPA 2 password?

The Wi-Fi Protected Access second-generation technology requires a WPA2 password. This protocol will be used while configuring your home network system to create a Wi-Fi password in your router’s settings. For a WPA2 password, you won’t need to fulfill any particular conditions.

3. What is the WAP password?

WPA Key or Security Key is the code that enables a device to connect to a WiFi network. It is also known as a WPA/WPA2 Passphrase, a WEP Key, or a Wi-Fi Security Key. You’ll be able to see the password on your modem or router that is saved with a different name.

Also read: 8 Essential Features a Good Web Host Should Provide

Last Updated on January 18, 2023 by Apeksha Soni